AGM WLAD (Quick View)
| Best For | Home Defense, NVG Builds, Hog Hunting |
| Laser Class | Class 1 IR + Class 3R Green Visible |
| Mounting | MIL-STD 1913 Picatinny (Tool-Free QD) |
| Key Feature | 3-in-1 Laser System (IR + VIS + IR Flood) |
If you’ve been searching for a legit multi-laser system that’s civilian-legal and doesn’t blow past the $1,500 mark, the AGM WLAD is one of the best all-in-one options out there. Where most budget units offer a single laser or a dim illuminator, the WLAD gives you the complete package: a Class 1 IR laser, a green visible laser for daytime zero, and an adjustable IR flood — all packed into a rugged, compact housing.
Unlike stripped-down compact lasers, this is an actual tri-function unit built for night vision rifle setups. The IR aiming laser gives you solid zero retention under nods, the visible green helps with daytime confirmation, and the IR illuminator provides floodlight visibility in dark environments, without the need to bolt on a separate IR flashlight. That’s rare in this price range.
It mounts up easily via a tool-free QD Picatinny clamp and is compatible with standard remote pressure switches for ambidextrous control. Whether you’re setting up a home defense rifle under NODS, running night drills, or prepping for hog hunts under thermal or dual tubes, the WLAD delivers consistent, reliable performance you can trust.
At Voodoo Firearms, we’ve tested the WLAD in low-light scenarios and found it to be one of the best entry points into full-spectrum laser setups. If you’re building your first NVG rifle or want something more capable than a pointer-only unit, this is the smart, no-regrets buy.
📜 Quick Navigation
AGM WLAD Specifications
| Feature | Details |
|---|---|
| Laser Type | Visible Green Laser (Class 3R <5 mW) + IR Laser (Class 1 <0.7 mW) |
| White Light | ❌ None |
| IR Illuminator | ✅ Yes – 850nm IR LED, adjustable 2°–30° beam angle |
| Housing Material | Aircraft-Grade Aluminum (Hardcoat Anodized) |
| Mounting | QD HT Mount – MIL-STD-1913 Picatinny |
| Activation | Top Push Button + Rear Remote Port (Tape Switch Included) |
| Battery | 1× CR123A (Included) |
| Battery Life | ~3–4 Hours (Mode-Dependent) |
| Laser Visibility | IR Laser: Up to 2,500m (Night) VIS Laser: ~100m (Night) |
| Adjustments | Tool-Adjustable Windage & Elevation |
| Weight | 8.6 oz (244.5 g) with Battery |
| Dimensions | 4.6″ × 3.4″ × 1.8″ |
| Water Resistance | Submersible to 5 Meters |
| Operating Temperature | +4°C to +65°C (39°F to 149°F) |
| MSRP | $900.00 |
| Best Use Case | Night Vision Rifle Setups, Passive Aiming, IR Training, Hog Hunting |
🆚 Comparison Table: AGM WLAD vs L3 ATPIAL-C vs DBAL-A3
| Feature | AGM WLAD | L3 ATPIAL-C (Full Review) | Steiner DBAL-A3 (Full Review) |
|---|---|---|---|
| Laser Type | Visible green + Class 1 IR laser + IR illuminator | Visible red + Class 1 IR laser | Visible green/red + Class 1 IR laser + IR illuminator |
| Built-in White Light? | ❌ No | ❌ No | ❌ No |
| Night Vision Compatible? | ✅ Yes – IR pointer + IR illuminator | ✅ Yes – IR pointer only | ✅ Yes – IR pointer + IR illuminator |
| IR Illuminator Power | LED IR flood, 850nm, adjustable 2°–30° | None | Low-power VCSEL, fixed focus |
| Mount Type | QD HT Mount (MIL-STD 1913 Picatinny) | Standard MIL-STD 1913 rail clamp | Tool-free Picatinny clamp |
| Activation | Top button + rear port (tape switch included) | Fire button + dual remote ports | Top-mounted switch + remote port |
| Battery Type | 1× CR123A | 1× CR123A | 1× CR123A |
| Battery Life | ~3–4 hours (mode-dependent) | ~6 hours (IR laser only) | ~3 hours (typical use) |
| Housing Material | Aircraft-grade aluminum | 7075-T6 aluminum | 6061-T6 aerospace aluminum |
| Zeroing Adjustments | Tool-adjustable windage & elevation | Tool-adjustable, tactile clicks | Tool-adjustable with indexed dials |
| Daylight Visible? | ✅ Yes (green laser visible to ~100m) | ✅ Yes (25–50 yd typical) | ✅ Yes (~50 yd typical) |
| Waterproof Rating | Submersible to 5 meters | IPX8 – Submersible to 20m | IP68 – Fully sealed |
| Weight | 8.6 oz (with battery) | 7.5 oz (with battery) | 8 oz (with battery) |
| Size (L×W×H) | 4.6″ × 3.4″ × 1.8″ | 4.6″ × 2.8″ × 1.6″ | 4.0″ × 2.0″ × 1.6″ |
| MSRP | $895.00 | $2,359.00 | $1,864.99 |
| Best Use Case | Civilian NVG builds, passive aiming, hog hunting | Suppressed rifles, passive aiming with NVGs | Duty rifles, compact NV-capable ARs |
| Buy Link | 🔗 Check Price |
🔗 Check Price |
🔗 Check Price |
🛡️ Why We Like the AGM WLAD Laser System
- 💥 True Multi-Beam Capability – Combines a daylight-visible green laser, a Class 1 IR pointer, and a built-in IR illuminator, giving you both passive aiming and onboard infrared flood in one rugged system.
- 💥 Field-Proven Controls – Features a top-mounted activation button and a Crane-compatible remote port, making it easy to integrate with standard pressure switches for any rifle setup
- 💥 Zero That Tracks – Tool-adjustable windage and elevation offer solid tactile feedback, holding zero reliably across suppressed builds, recoil cycles, and sling pressure.
- 💥 Rugged, Long-Range Design – Constructed from aircraft-grade aluminum and submersible to 5 meters, the WLAD is built to survive harsh environments, rough use, and mission-critical applications.
Bottom line: The AGM WLAD is the go-to choice for civilian shooters who want real IR + VIS laser capability and onboard illumination — all without breaking the bank or dealing with restrictions. Whether you’re scanning fields for targets or building a rifle for serious NVG use, this is one of the few full-featured systems in its class that delivers pro-grade function under $900.
AGM WLAD Laser Review
Key Features:
- Tri-Beam Precision – The WLAD isn’t just an IR pointer. It gives you a green visible laser for daylight zeroing, a Class 1 IR aiming laser for nods, and a built-in adjustable IR illuminator — all in one compact package. No add-ons required
- Tactically Tuned Controls – Whether you prefer a top-mounted activation button or a Crane-style remote switch, the WLAD gives you both. It integrates smoothly into any NV-capable rifle, SBR, or suppressed platform with minimal setup
- Dial-In Accuracy – Precision matters at night. The WLAD’s tool-adjustable windage and elevation turrets give you tactile clicks and reliable zero retention — even after rough handling, sling pressure, or hard recoil cycles
- IR Flood That Adapts – Switch from a narrow beam for long-range spotting to a wide-angle flood for room clearing or scanning fields. The adjustable 850nm IR illuminator gives you complete control with a quick twist of the bezel
- Mission-Grade Build Quality – This isn’t built for LARPing. The hardcoat anodized aluminum housing is rugged, waterproof to 5 meters, and designed to survive real use — from field ops to hog hunts to harsh-weather patrol rifles
- Instant QD Mounting – The included quick-detach HT mount locks onto any 1913 Picatinny rail without tools. It holds tight under stress, zeroes easily, and detaches fast when needed
- Optimized for Real NVG Work – Unlike watered-down civilian lasers that advertise NV compatibility without delivering, the WLAD was designed with MIL/LE use in mind and refined into a Class 1 system for serious civilian shooters. No gimmicks. Just reliable IR performance
Most lasers in this price range fake it. The WLAD doesn’t. It offers true multi-spectrum laser output with durable controls, tactical flexibility, and zero compromises, all without a $2,000 price tag.
Whether you’re training with dual tubes, scanning for hogs at night, or prepping your rifle for low-light defense, the AGM WLAD is the tool you want when you’re done pretending and ready to get serious.
Here’s a quick breakdown of what we like and dislike about the AGM WLAD:
✅ Pros
- Tri-Beam System – Combines a Class 1 IR laser, 850nm IR floodlight, and a visible green laser, giving you full-spectrum control in one device
- Daylight Visible – The Class 3R green laser remains bright enough to zero confidently in daytime or low-light overt use
- Tactically Intuitive – Fire button and Crane-compatible remote port make activation smooth whether you’re shooting upright, prone, or under NVG
- Tool-Free Mounting – The QD HT mount clamps securely to any Picatinny rail with zero wiggle and no tools required
- Rugged and Waterproof – Built from hardcoat anodized aluminum and sealed to 5 meters — built to survive the field, not the range
- Adjustable IR Flood – Twist to widen or tighten the IR beam from 2° to 30° — perfect for indoor clears or outdoor scans
- 100% Civilian Legal – Ships Class 1 ready — no tax stamps, no forms, no restrictions
❌ Cons
- Bulky Footprint – Heavier and longer than compact units like the ATPIAL-C or DBAL-A3, might feel oversized on ultralight builds
- Manual Laser Switching – Doesn’t support simultaneous IR and VIS activation — you’ll need to toggle between modes
- Battery Hungry – Using both IR laser and illuminator drains faster than you’d think — bring spares if you’re out past midnight
Is the AGM WLAD Worth It?
Absolutely. The AGM WLAD is one of the most capable, well-balanced laser systems available to civilians without jumping into NFA-regulated territory or military-only pricing. For under $900, you’re getting a full-spectrum aiming solution: a daylight-visible green laser for zeroing, a crisp Class 1 IR laser for passive aiming under nods, and a variable-beam IR flood for active target illumination in total darkness.
Where most civilian laser units compromise on build quality, beam output, or feature integration, the WLAD delivers a rare combination of performance and reliability in a single, ruggedized unit. Whether you’re building a low-light defense rifle, setting up a hog hunting carbine, or running drills under night vision, the WLAD does the job — and then some — without extra mounts, adapters, or Frankenstein setups.
What Sets It Apart?
What separates the WLAD isn’t just that it has three beams — it’s how intelligently those beams are integrated into one coherent tool.
Instead of stacking separate devices or sacrificing beam power for compactness, the WLAD gives you a visible laser, IR pointer, and adjustable 850nm IR floodlight all in a compact, waterproof aluminum housing that mounts with a tool-free QD clamp. There’s no extra gear to bolt on, no questionable plastic mounts to trust, and no confusion when it’s time to hit the switch.
This system was clearly designed with real users in mind, not just LARP kits or clone builds. The beam outputs are tuned for actual night vision conditions. The controls are intuitive, tactile, and adaptable. And the physical footprint walks the line between “duty capable” and “not overly bulky” in a way few other civilian laser systems manage.
Most importantly, it doesn’t pretend to be something it’s not. The WLAD isn’t a castrated military laser — it’s a purpose-built, civilian-legal IR system that just happens to punch way above its price.
Personal Experience
We ran the AGM WLAD on both a suppressed 14.5″ AR and a 16″ DMR-style rifle equipped with Gen 3 white phosphor dual tubes, testing in woodland, open fields, and low-light structures over several sessions.
The IR laser delivered excellent clarity and tight beam discipline from 25 to 300 yards with no bloom, no flare, and no distortion under nods. Target transitions felt snappy, and beam alignment held consistent after repeated suppressed fire and sling stress. The visible green laser was zeroed during daytime drills and stayed locked through every range session — no shift, no guesswork.
The IR flood was a standout. Dialed wide, it gave perfect room-filling light for CQB-style runs. When tightened, the spot beam punched out deep into open fields, allowing us to identify and PID targets with passive optics out past 100 yards.
The QD HT mount locked down clean, and we had no compatibility issues with offset lights, dual-lead ModButtons, or Unity accessories. Top button activation was solid and responsive, but we primarily used a Crane-compatible pad routed to our front grip for fast transitions. Every control felt like it was placed where you’d want it under stress — no lag, no searching.
After over 600 rounds, including barricade transitions, prone shooting, and dynamic movement, the unit showed zero POI shift, zero internal fogging, and zero failure.
It’s ideal for:
- Night Vision Rifle Builds – The WLAD is purpose-built for passive aiming under dual tubes. With a crisp Class 1 IR laser and a flood-to-spot IR illuminator onboard, it gives you both close-range illumination and long-range target identification without revealing your position.
- Suppressed ARs and SBRs – It’s compact enough for tight rail space, but powerful enough to run on a 14.5″ or suppressed carbine without compromising zero or interfering with lights and switches. A perfect fit for real-world setups, not just clean bench builds.
- Rural Defense & Patrol Rifles – Whether you’re defending a homestead, scanning acreage, or prepping for night-time response, the WLAD gives you military-grade IR performance without the legal hassle. Fully civilian-legal and rugged enough for serious use.
- NVG Training & Low-Light Shooters – If you’re taking a night vision class or dialing in your passive aiming under pressure, the WLAD gives you everything in one package — a clean IR beam, a visible zeroing laser, and an adjustable illuminator for full-spectrum realism.
Why We Like It:
The AGM WLAD stands out as one of the only sub-$1,000 laser systems that delivers true tri-beam performance in a rugged, ready-for-anything package. It combines the features you’d expect from high-end military units — like an onboard IR flood and passive-aiming-capable laser — but in a civilian-legal form that doesn’t sacrifice quality, clarity, or control.
You’re getting:
- Full-Spectrum Laser Capability – A crisp Class 1 IR laser for passive night vision aiming, a bright green visible laser for daytime zeroing, and an integrated IR floodlight that you can adjust from tight spot to wide-angle fill — all in one compact device
- Combat-Ready Durability – Built from aircraft-grade aluminum and hardcoat anodized, the WLAD is submersible to 5 meters and designed to handle suppressed recoil, heavy movement, and harsh environmental conditions without losing zero
- Drop-In Compatibility – The tool-free QD mount locks to any MIL-STD 1913 rail, and the controls — top fire button and Crane-compatible remote port — make it easy to run on a wide range of rifle setups without needing weird adapters or aftermarket hardware
- Set It and Forget It Zero – The tactile windage and elevation adjustments make zeroing smooth and reliable, with retention you can trust across calibers, barrel lengths, and optic configurations
If you’re looking for a night vision–capable laser system that gives you real-world performance without military paperwork or a second mortgage, the AGM WLAD checks every box. It’s legal, it’s durable, and it works — exactly what a laser should be.
AGM WLAD Laser Setup & Zeroing
Mounting and zeroing the AGM WLAD is a straightforward process, but with three independent emitters and night vision in play, precision matters. Whether you’re setting up for training, defense, or night hunting, your zero needs to hold under recoil, sling tension, and thermal shift. Here’s how to dial it in for dependable performance under NODs.
Here’s how to dial it in properly:
-
Mounting: Use the integrated quick-detach HT clamp to mount the WLAD securely to your rifle’s MIL-STD 1913 Picatinny rail. Forward placement (10 or 11 o’clock) on your handguard tends to offer optimal IR beam alignment while preserving space for pressure switches, lights, and sling routing. Make sure the mount is seated firmly and evenly to avoid POI drift from impact or torque stress during movement.
-
Laser Adjustment: Begin with your green visible laser, using a known zero distance like 25 or 36 yards. Align the laser dot to match your optic’s point of aim. This step gets you close enough for real-world engagement ranges while keeping parallax manageable, especially on LPVO or red dot setups.
- IR Laser Adjustment: The IR aiming laser is typically co-aligned at the factory, but it’s smart to fine-tune under night conditions. Use the windage and elevation turrets to adjust for your specific barrel length, optic height, and desired zero distance. For most civilian night vision applications, a 36- to 50-yard IR zero is ideal, balancing mid-range accuracy with usable holdovers up close
-
IR Flood Tuning: Use the rotating front bezel to control the IR illuminator beam. Dial it wide for indoor or close-quarters use, or tighten it down for long-range scanning or passive PID in open terrain. The beam divergence adjusts from 2° to 30°, giving you absolute control over your NVG visibility without needing a separate illuminator.
💡 Pro Tip: Reconfirm your zero after any serious recoil cycle, suppressor heat soak, or handguard shift. The WLAD is built tough, but even top-tier lasers can drift slightly from pressure, sling tension, or thermal expansion. A quick zero check under NODs every few outings ensures your setup is always ready to go when it matters.
Final Verdict: Should You Buy?
If you’re building a night vision–capable rifle and want a civilian-legal laser system that actually performs, the AGM WLAD is one of the smartest choices on the market. It gives you true passive aiming, a daylight-visible zeroing laser, and a fully adjustable IR flood illuminator — all in one rugged, waterproof unit that’s ready for suppressed carbines, dual-tube NODs, or low-light defense scenarios.
You’re not just buying a laser. You’re getting a complete infrared engagement tool that works seamlessly with your rifle setup — no stacked devices, no bulky mounts, no legal gray zones. The WLAD was built for professionals but made accessible to civilians who take night vision seriously.
| Best For | Home Defense, NVG Builds, Hog Hunting |
| Laser Class | Class 1 IR + Class 3R Green Visible |
| Mounting | MIL-STD 1913 Picatinny (Tool-Free QD) |
| Key Feature | 3-in-1 Laser System (IR + VIS + IR Flood) |
Related AR-15 Laser Guides
Don’t forget to check out these posts to learn more about Lasers & AR-15s:
- Best Lasers for AR-15 (Ultimate 2025 Guide)
- Red vs Green Laser (Which is Best?)
- How To Choose A Laser
- Zeroing Your Laser On AR-15
❓ FAQ – AGM WLAD Laser Questions
Q: How does the AGM WLAD activate?
A: The WLAD uses a top-mounted fire button for manual activation and includes a rear Crane-style port compatible with pressure switches like the SureFire ModButton, Unity Hot Button, and others. You can assign each beam — IR laser, visible laser, and IR flood — independently, depending on your wiring setup.
💡 Tactical Insight: Most users assign the IR flood to their remote switch for night work under NODs, while keeping the visible laser on the main button for fast daylight zeroing.
Q: Is it hard to mount on an AR platform?
A: No — the WLAD features a tool-free QD HT side clamp that mounts directly to any MIL-STD-1913 Picatinny rail. It fits comfortably on rifle-length handguards, SBRs, and suppressed platforms without interfering with optics, lights, or slings.
🔧 Pro Tip: Always clean the rail surface and confirm proper clamping pressure before zeroing. Even high-end lasers can shift under recoil or sling tension if not mounted cleanly.
Q: Is the visible laser usable during the day?
A: Yes. The green Class 3R laser is daylight-visible out to 50–100 yards in shaded or overcast conditions. It’s ideal for zeroing optics or marking targets when NODs aren’t in use.
🎯 Bonus Tip: Zero your IR laser separately under night vision. Even factory-aligned VIS/IR lasers can diverge slightly, which may affect POI during passive aiming beyond 50 yards.
Q: What battery does it use, and how long does it last?
A: The WLAD runs on one CR123A lithium battery. Expect 3–4 hours of runtime with mixed use and up to 5+ hours when using the IR laser alone. Runtime will vary depending on beam intensity and frequency of activation.
🔋 Real-World Insight: Always carry a spare CR123A — especially in cold weather or when running the IR flood at full brightness. Power draw increases significantly under high output.
Q: Is the AGM WLAD duty-rated?
A: Yes. The unit is machined from aircraft-grade aluminum, hardcoat anodized, and submersible to 5 meters. It’s built to withstand suppressed recoil, environmental stress, and hard use in both civilian and professional settings.
🛡️ Hard Use Insight: The WLAD holds up exceptionally well in night vision training, rural patrol, and field conditions where failure isn’t an option — no plastic parts, no shortcuts.
Written by the Voodoo Firearms Team
Certified instructors. Veteran-owned. Trusted by shooters of all levels. Our team combines certified instruction credentials with extensive real-world experience in firearms. While some team members maintain operational privacy due to their service backgrounds, our commitment to excellence is demonstrated through our perfect 5-star customer rating and comprehensive firearms training programs. We pride ourselves on delivering respectful, judgment-free guidance and education to shooters of all experience levels, ensuring every customer receives the personalized attention they deserve.
➡️ Learn more about our team Here.
➡️ Check out more training tips, gear reviews, and expert insights on the Voodoo Firearms Blog.
Why You Can Trust Voodoo Firearms
Real Expertise, Not Paid Hype
- Certified instructors lead Illinois CCL training & tactical firearms courses
- Veteran-owned and operated—we walk the walk
- No paid reviews. No fluff.
What Sets Us Apart:
- 5-Star Local Reputation
- Rigorous Gear Testing
- Pro & Beginner-Friendly Content
- In-Person Help in Minooka, IL
Need expert advice:
📍 Visit us at 408 W Mondamin St, Minooka, IL 60447
📞 Call or Text our knowledgeable team at (815) 218-6620
Not sure what to get? Hit us for a quick vibe check. No pressure—just straight-up advice.
📧 Shoot our instructors an email at voodoo@voodoofirearms.com
Swing by to upgrade your setup or test gear in person—and mention this article for a free Voodoo Firearms logo sticker (while supplies last).
🛒 Visit VoodooFirearms.com to shop lasers, optics, lights, and gear trusted by real shooters.
Each laser was reviewed by a certified instructor and tested under real-world conditions.
Note: Always ensure compatibility with your firearm and adhere to local laws and regulations when installing tactical accessories.